TM 5-3895-369-14
4-167. ADDITIVE SYSTEM VALVE ASSEMBLY AND PIPING ASSEMBLY
REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanics: automotive
TM or Para
Condition Description
Additive system pump
Wrench, Pipe 36 in.
removed.
Suitable container (capacity 5 gal. [ 19 liters])
Materials/Parts
Compound, sealing, pipe thread (item 17,
Packing, preformed (3)
Ring, seal (2)
Washer, thrust (1)
Removal.
a.
Spilled bituminous fluid is slippery. Clean
up immediately or injury to personnel may
result.
NOTE
Place suitable container with a 5 gallon
(19 liters) capacity under valve assembly to
catch spilling fluid.
(1) Remove four nuts (1), screws (2), lower body
end and piping assembly (3), and valve body
assembly (4) from upper body end (5).
4-541