TM 5-3895-369-14
4-157. ROTOR DEPTH CONTROL BLOCK REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Condition
Tools
TM or Para
Tool kit, general mechanic's: automotive
Condition Description
Rotor boom removed.
Materials/Parts
Pin, cotter
a.
Removal.
NOTE
Note location of control block for correct
installation.
(1) Remove cotter pin (1), clevis pin (2) and
control block (3) from rotor depth control
bar (4). Discard cotter pin.
(2) Repeat step (1) and remove remaining
control block (3) from hood depth control
bar (5).
b. Installation.
(1) Install rotor depth control block (3) on rotor
depth control bar (4) with clevis pin (2) and
cotter pin (1).
(2) Repeat step (1) and install remaining
control block (3) on hood depth control
bar (5).
NOTE
Follow-on maintenance: Install rotor boom (para 4-175).
END OF TASK
4-520