TM 5-3895-369-14
4-158. ROTOR DEPTH CONTROL BAR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Bar stops and springs
Wrench, torque
removed.
Hood removed.
Materials/Parts
Locknut
Removal.
a.
(1) Remove locknut (1) and screw (2) from
hood lift bracket (3). Discard locknut.
(2) Remove rotor depth control bar (4) from
hood lift control bracket (3).
Installation. Install rotor depth control bar (4)
b.
on hood lift control bracket (3) with screw (2) and
locknut (1). Tighten locknut 280 lb-ft (380 Nm).
NOTE
Follow-on Maintenance:
Install hood (para 4-125).
Install bar stops and springs (para 4-156).
END OF TASK
4-521