TM 5-3895-369-14
4-106. PARKING BRAKE LEVER AND LINKAGE REPLACEMENT (CONT).
(2) Remove locknut (7), washer (8), and
screw (6) from parking brake housing (4).
Discard locknut.
NOTE
Note how cables go inside housing.
Brake will not work properly if
assembled incorrectly.
Loose parts inside housing will fall if
care is not taken. Parking brake
housing is removed as an assembly.
Do not lose any parts removed in the
following steps.
(3) Remove cotter pin (9) washer (10), and
pin (11) from housing (4) and parking brake
handle lever (12).
(4) Move half of housing (4) aside and remove
spacer (13) and cables (14 and 15).
(5) Pull brake handle lever (12) from between
two cable holders (16).
4-378
