TM 5-3895-369-14
4-103. PTO DRIVE SHAFT GUARD REPLACEMENT (CONT).
(2) Remove retaining pin (6), anchor pin (7),
and flap assembly (8) from mounting
bracket (9).
(3) Remove four nuts (10), lockwashers (11),
screws (12), retaining plate (13). and backing
plate (14) from flap (15). Discard
lockwashers.
(4) Remove four nuts (16), lockwashers (17),
screws (18), bracket plate (19), backing
plate (20). and flap (15).
b. Installation.
(1) Install backing plate (20) and bracket
plate (19) on flap (15) with four screws (18),
lockwashers (17), and nuts (16).
4-370
