TM 5-3895-369-14
4-102. CLUTCH DRIVE SHAFT REPLACEMENT.
This task covers:
b. Installation
a. Removal
INITIAL SETUP
Equipment Condition
Tools
TM or Para
Condition Description
Tool kit, general mechanic's: automotive
Parking brake set.
Clutch in neutral.
Wrench, torque
Materials/Parts
Lockwashers (8)
Removal.
a.
(1) Remove four screws (1) lockwashers (2)
and flange yoke (3) from output flange (4).
Discard lockwashers.
(2) Remove four nuts (5), lockwashers (6),
screws (7) and flange yoke (8) from pillow
block (9). Discard lockwashers.
(3) Remove drive shaft (10) from vehicle.
b. Installation.
(1) Position drive shaft (10) on vehicle.
(2) Install flange yoke (8) on pillow block (9)
with four screws (7), lockwashers (6), and
nuts (5). Tighten nuts 75 to 85 lb-ft
(101.68 - 115.24 Nm).
(3) Install flange yoke (3) on output flange (4)
with four lockwashers (2) and screws (1).
Tighten screws 75 to 85 lb-ft (101.68 -
115.24 Nm).
END OF TASK
4-368