TM 5-3895-369-14
4-96. TWO-SPEED LINKAGE ADJUSTMENT (CONT).
(3) Loosen jamnuts (7 and 8) on other end of
cable (9).
(4) Remove locknut (10) and screw (11) from
cable end (12). Discard locknut.
Do not overtighten nuts as damage may
result to cable and/or two-speed range box.
(5) Tighten jamnut (8) against mounting
bracket (13) until cable (9) is snug. Tighten
jamnut (7) against mounting bracket.
(6) Tighten jamnut (5) against bracket (14).
Tighten jamnut (6) against bracket.
(7) Check cable (9) for equal travel on both
ends.
(8) Position lever, adjust clevis (3) as necessary,
and tighten jamnut (15). Reinstall pin (2)
and cotter pin (1).
(9) Adjust cable end (12) as necessary and
tighten jamnut (16). Reinstall screw (11)
and locknut (10).
4-356