TM 5-3895-369-14
d. Assembly.
(1) Install jamnut (10), washer (9), jamnuts (8
and 7), and cable end (6) on cable (5).
Tighten jamnut against cable end.
(2) Install jamnut (4), washer (3), jamnut (2)
and clevis (1) on cable (5).
c.
Installation.
(1) Install cable end (1) in shifting shaft (4) with screw (2) and locknut (3).
(2) Install cable assembly (5) on mounting bracket (6) so that bracket is mounted between washer (7) and
jamnut (8) on one side and jamnut (9) on the other side. Tighten nuts evenly to eliminate slack on cable
assembly between shifting shaft (4) and mounting bracket.
4-353