TM 5-3895-369-14
(2) Remove four locknuts (5), eight washers (6),
four screws (7), and holder (8) from
fender (4). Discard locknuts.
b. Installation.
(1) Install holder (8) on fender (4) with four
screws (7), eight washers (6), and four
locknuts (5).
NOTE
Nuts go between tie down and fender.
(2) Install tie down (2) on fender (4) with two
screws (1) and nuts (3).
NOTE
Follow-on Maintenance: Install fuel can (para 2-19).
END OF TASK
4-229