TM 5-3895-369-14
4-49. FUEL/HYDRAULIC TANK REPLACEMENT/REPAIR (CONT).
e.
Installation.
Fuel/hydraulic tank weighs 261 lbs
(118 kg). Attach suitable lifting device
prior to installation to prevent possible
injury to personnel.
(1) Mechanic operates suitable lifting device
while assistant guides and installs fuel
tank/hydraulic tank (20) on vehicle.
(2) Install tank (20) with four screws (19), eight
washers (18), and four nuts (17).
Adhesive sealant can damage your eyes,
skin, or clothing and also gives off harmful
vapors. Wear protective goggles and use in
well ventilated area. If adhesive gets in
eyes, try to keep eyes open; flush eyes with
water for 15 minutes and get immediate
medical attention.
(3) Coat threaded fittings on valves (16, 12, 6,
and 3) with pipe thread sealant compound.
(4) Install hose (15) on valve (16) and tighten
clamp (14).
(5) Install two hoses (13 and 11) on valve (12). Tighten clamp (10).
(6) Install four hoses (9, 8, 7, and 5) on valve (6). Tighten clamp (4).
(7) Install hose (2) on valve (3) and tighten clamp (1).
4-226