TM 5-3895-369-14
4-43. TURBOCHARGER AIR INLET HOSE REPLACEMENT (CONT).
Installation.
c.
NOTE
To install air inlet hose as an assembly,
perform steps (14) and (16).
(1) Position clamp (20) on hump hose (5).
(2) Install pipe (21) halfway in hump hose (5).
(3) Position two clamps (19 and 17) on elbow
hose (16).
(4) Align matchmarks and install pipe (18)
halfway in elbow hose (16).
(5) Install elbow hose (16) on pipe (21).
(6) Position two clamps (15 and 12) on elbow
hose (14).
(7) Align matchmarks and install pipe (13) in
elbow hose (14).
(8) Align matchmarks and install elbow
hose (14) on elbow (16).
(9) Position two clamps (11 and 8) on elbow
hose (10).
(10) Align matchmarks and install pipe (9) in
elbow hose (10).
(11) Align matchmarks and install elbow hose
(10) on elbow hose (14).
(12) Install clamp (7) on elbow hose (2).
(13) Align matchmarks and install elbow hose (2) on pipe (9).
4-200