TM 5-3895-369-14
f. To prevent moisture and foreign matter from entering open housings, lines, and other openings, use protective
coverings as soon as possible after disassembly. Wrap all parts in clean paper or dip parts in the fluid in which they
normally operate.
g. Remove parts only if repair or replacement is required. Do not disassemble a component any further than
necessary to accomplish needed repairs.
4-22. PAINTING.
Instructions for preparation of material to paint, how to paint, and material to be used are in TM 43-0139.
Instructions for camouflage painting are contained in FM 5-20. Stenciling and marking military vehicles are listed in
TB 43-0209. Data plate location and description is listed in Chapter 2.
4-23. LUBRICATION INSTRUCTIONS.
Refer to Lubrication Chart (Figure 3-1) for unit maintenance lubrications.
4-157
