TM 5-3895-369-14
LUBRICATION CHART
MIXER, ROTARY TILLER
Drycleaning solvent (P-D-680) IS TOXIC and flammable. Wear protective goggles and gloves; use only in a well ventilated area;
avoid contact with skin, eyes, and clothes and do not breathe vapors. Keep away from heat of flame. Never smoke when using
solvent; the flash point for type I drycleaning solvent IS 100F (38C) and for type II is 138F (60%). Failure to do so may result
in injury or death to personnel.
If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help. If solvent contacts skin or
clothes, flush with cold water If solvent contacts eyes, immediately flush eyes with water and get immediate medical attention
Intervals are based on normal operation. Reduce to compensate
Clean fittings before lubricating. Clean parts with drycleaning sol-
for abnormal operation and severe conditions or contaminated lu-
vent. Dry before lubricating.
bricants. During inactive periods, intervals may be extended pro
vided adequate preservation precautions are taken. Relubricate
after washing or fording.
INTERVAL
LUBRICANT
LUBRICANT
INTERVAL
F i g u r e 3-1. Lubrication Chart (Sheet 1 of 8)
3-4