TM 5-3895-359-14&P
Install Tachometer Drive
1. Start the tachometer drive shaft adaptor in the end of
the camshaft. Then using a suitable sleeve, tap or
press against the shoulder on the adaptor until the
shoulder contacts the camshaft.
2. Install the drive cover and gasket on the flywheel
housing. Use a new gasket.
3. Align the tachometer drive cover and adaptor with
the tachometer drive shaft as outlined on Page 10-8-14.
4.
Install the tachometer and shaft assembly by
connecting tang of flexible shaft to adaptor. Position
tachometer assembly to flywheel housing and install and
tighten capscrews.
5. Position instrument panel and install and tighten
remaining capscrews holding instrument panel to
Fig. 5 - Tachometer Head.
flywheel housing.
Fig. 4 - Tachometer Drive.
10-8-20
