TM 5-3895-359-14&P
5. Use the guide studs J 1927-01 and the camshaft end
4. With the bearing in place, tighten the 3/8" -16 end
bearing to install the rear end plate in the same manner
plate retaining bolts to 30-35 lb-ft (41-47 Nm) torque.
as outlined above.
Tighten the 1/2"-13 bolts to 71-75 lb-ft (96-102 Nm)
torque. Remove the camshaft bearing which served as
a pilot while attaching the end plate.
10-2-16