TM 5-3895-342-34
b. Disassembly.
(2) Inspect all parts for wear and damage.
Remove the cylinder block
Repair or replace worn or damaged parts.
studs, oil filer mounting pad studs, spray nozzles, and
d. Installation. Install the cylinder blocks and
pipe plugs from the crankcase assembly as illustrated in
crankcase in reverse of instructions in subparagraph a
c. Cleaning, Inspection and Repair.
above.
Note. Use a new gasket on each cylinder block
(1) Clean all parts with cleaning solvent.
when installing.
3-27
