3-6. ENGINE OIL LEVEL CHECK AND SERVICE (CONT).
b. Oil Level Service.
(1) Remove oil fill cap (4) from valve cover (5).
or serious damage will occur to engine.
(2) Add oil according to lubrication chart
(3) Install oil filler cap (4) on valve cover (5).
3-7. ENGINE COOLANT CHECK AND SERVICE.
Use extreme care when removing the radiator pressure
cap. Sudden release of pressure can cause a steam flash
which could seriously injure personnel.
Place clean, thick waste cloth over radiator
b. Slowly loosen cap (1) to first stop.
Allow pressure to dissipate completely.
d. Remove cap (1).
e. If necessary, add coolant/antifreeze at 50/50
concentration of coolant/antifreeze to water.