Section Ill. OPERATOR MAINTENANCE PROCEDURES
3-5. OPERATOR MAINTENANCE INTRODUCTION.
This section covers authorized operator maintenance tasks. The tasks covered in this section are defined in the MAC
and limited to the inspection and servicing of vehicle components.
3-6. ENGINE OIL LEVEL CHECK AND SERVICE.
a. Oil Level Check.
(1) Open engine access door (1).
(2) Remove oil dipstick (2).
(3) Wipe oil from dipstick (2).
(4) Insert dipstick (2) in dipstick tube (3).
(5) Remove dipstick (2).
(6) Check oil level. Oil level should be between
H and L marks on dipstick (2).
(8) Install dipstick (2).