TM 5-3895-372-10
NOTE
No matter what you use to measure the admix, you should use five parts of water to each part of
admix.
b. Putting Solution into the Low-Flow Tank. (See fig. 2-22).
(1) Close the air gate valve, the solution gate valve, and the drain valve. (Turn them all the way clockwise.).
(2) Open the two gage valves. (Turn them all the way counterclockwise ). Be sure the draincock and vent on
the gage valves are closed.
Figure 2-22. Filling the Low-Flow Admix Tank.
TA 075488
2-34
