TM5-3895-369-24P
UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
SECTION I. INTRODUCTION
1.
SCOPE
This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of unit, direct support, and general
support maintenance of the mixer, rotary tiller. It authorizes the requisitioning, issue, and disposition of spares, repair
parts and special tools as indicated by the source, maintenance, and recoverability (SMR) codes.
2.
GENERAL
In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections:
a.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes parts which must be removed for replacement of the
authorized parts. Parts Lists are composed of functional groups in ascending alphanumeric sequence, with
the parts in each group listed in ascending figure and item number sequence. Bulk materials are listed by
item name in FIG BULK at the end of the section. Repair parts kits or sets are listed separately in their own
functional group within Section II. Repair parts for repairable special tools are also listed in the section.
b.
Section III. Special Tools List. A list of special tools, special TMDE, and other special support equipment
authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND USABLE
ON CODE (UOC) column) for the performance of maintenance.
c.
Section IV. Cross-Reference Indexes. A list, in National item identification number (NIIN) sequence, of all
National stock numbered items appearing in the listings, followed by a list in alphanumeric sequence of all
part numbers appearing in the listings. National stock numbers and part numbers are cross-referenced to
each illustration figure and item number appearance. The figure and item number index lists figure and item
numbers in alphanumeric sequence and cross-references NSN, CAGE, and part numbers.
3.
EXPLANATION OF COLUMNS (SECTION II AND III).
a.
ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b.
SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code
containing supply/requisitioning information, maintenance category authorization criteria, and disposition
instruction, as shown in the following breakout:
1
