TM5-3895-369-14
5-49. STARTER ASSEMBLY REPAIR (CONT).
(6)
(7)
(8)
Install two brushes (42) with
lo&washer (41) and two screws (40).
Install two brush holders (36), brush ground
holders (37), and springs (38) in
brackets (39) with two pins (35).
Install grommet (34) and field
connector (33) in housing (11) with
screw (32).
(9)
If removed, install bushing (31) and oil
seal (30) in center bearing plate (29).
(10)
Install center bearing plate (29), gasket (28),
washer (27), bendix (26), collar (25),
retaining ring (24), and collar (23) on
armature (IS).
5-302
