TM 5-3895-369-14
(8)
Remove collar (23), retaining ring (24),
collar (25), bendix (26), washer (27),
gasket (28), and center bearing plate (29)
from armature (18).
(9)
If damaged, remove oil seal (30) and
bushing (31).
(10)
Remove screw (32), field connector (33),
and grommet (34) from housing (11).
(11)
Remove two pins (35), brush holders (36),
brush ground holders (37) and springs (38)
from brackets (39).
(12)
Remove two screws (40), lockwasher (41),
and brushes (42).
5-297
