TM 5-3895-369-14
5-36. OUTPUT FLANGE ASSEMBLY REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Shop equipment, automotive maintenance and
repair: organizational maintenance common
no. 1, less power
Wrench, torque
Materials/Parts
Adhesive sealant, silicone (item 1, appendix E)
Equipment Condition
TM or Para
Para 4-132
Para 4-102
Para 4-105
Condition Description
Forward floor plate
removed.
Clutch drive shaft
removed.
Parking brake cable
removed.
a. Removal.
(1)
Remove four nuts (1) and two brackets (2) from output flange assembly (3).
(2)
Remove flange (3) from clutch face (4).
b. Installation.
Adhesive sealant can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes.
If sealant contacts eyes, flush eyes with water and get immediate medical attention.
(1)
Apply sealant to face of clutch (4) and install output flange assembly (3) and two brackets (2) with four
nuts (1). Tighten nuts 250 to 270 lb-ft (339 - 366 N•m).
5-210
