TM 5-3895-369-14
5-35. CLUTCH HOUSING REPAIR (CONT).
Adhesive sealant causes immediate
bonding on contact with eyes, skin, or
clothing and also gives off harmful vapors.
Wear protective goggles and use in well-
ventilated area. If adhesive gets in eyes, try
to keep eyes open; flush eyes with water for
15 minutes and get immediate medical
attention.
(2)
Apply sealant to face of drive assembly (20)
and install clutch housing (6) with four
screws (19). Tighten screws to 110 to
120 lb-ft (149 • 163 N•m).
(3)
Install throwout yoke (17) and shaft (4) in
clutch housing (6). Install two keys (18)
in shaft.
5-208
