TM 5-3895-369-14
5-11. CYLINDER BLOCK REPAIR.
This task covers:
a. Inspection
c. Cleaning
b. Disassembly
d. Assembly
INITIAL SETUP
Tools
Shop equipment, general purpose repair: semi-
trailer mounted
Materials/Parts
Chips, soap (item 10, appendix E)
Detergent (item 19, appendix E)
Solvent, drycleaning (item 54, appendix E)
Oil, fuel (item 30, appendix E)
Oil, lubricating (item 36, appendix E)
Compound, retaining (item 18, appendix E)
Compound, sealing, pipe thread (item 17,
appendix E)
Equipment Condition
TM or Para
Para 5-8
Para 4-34
Para 5-12
Para 5-24
Para 5-14
Condition Description
Engine removed.
Oil cooler removed.
Cylinder head assembly
removed.
Camshaft removed.
Crankshaft removed.
a.
Inspection.
(1)
Check cylinder bores at position A
approximately 1 in. (25.4 mm) deep and at
4.5 in. (144.3 mm) deep. Normal
measurement is 4.0157 to 4.0203 in. (102.0 -
102.116 mm). If measurement is not within
limits, use oversized pistons and rings to
compensate.
5-119
