TM 5-3895-369-14
5-10. FRONT ENGINE MOUNT REPLACEMENT (CONT).
b. Installation.
NOTE
If installing front engine mount with engine in vehicle, engine must be raised in front with suitable
lifting device.
(1)
Install front engine mount (5) on front of engine block (4) with four screws (6). Tighten screws 216 lb-in
(24 N•m).
(2)
Using suitable lifting device lower engine (4) until engine mount (5) is in installation position.
(3)
If removed, install shock pad (2) and screw (1). Tighten screw 150 lb-ft (203 N•m).
(4)
Remove suitable lifting device from front engine mount (2).
NOTE
Follow-on Maintenance: Remove engine from stand and install in vehicle.
END OF TASK
5-118
