TM 5-3895-369-14
4-152. ADDITIVE CHAIN REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic’s: automotive
Equipment Condition
TM or Para
Para 4-90
Para 4-153
Condition Description
Negative battery cables
disconnected.
Additive coupling guard
removed.
a.
Removal.
NOTE
Refer to paragraph 2-12, steps 4, 5, and 6 to center master link.
(1)
Center master link pin (1) over hole in bottom of bracket (2).
(2)
Remove link retainer (3).
(3)
Loosen two nuts (4) on two screws (5) attaching motor (6) to bracket (2).
(4)
Raise motor (6) and remove master link pin (7), three spacers (8), and chain (9) from sprocket (10).
b. Installation.
(1)
Install chain (9) on sprocket (10) with three spacers (8) and master link pin (7).
(2)
Tighten two nuts (4) on screws (5) attaching motor (6) to bracket (2).
4-498
