(17)
Loosely install proximity sensor (46) in
clamp (47) with screw (48).
(18)
Install clamp (47) on bracket (49) with two
screws (50). lockwasher (51), and nuts (52).
(19)
Using feeler gauge, measure 0.0020 in.
(0.051 mm) between proximity sensor (46)
and gear wheel (53); tighten screw (48)
securely.
NOTE
Follow-on maintenance:
Install additive coupling guard (para 4-153).
Connect negative battery cables (para 4-90).
END OF TASK
TM 5-3895-369-14
4-495
