TM 5-3895-369-14
4-136. DATA PLATES REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic’s: automotive
Materials/Parts
Rivets
a.
Removal.
Drilling rivets while the battery is connected can cause electrical shock. Disconnect battery before
using any electric tool.
Use protective clothing. Goggles or safety glasses are recommended. Loose metal can fly up and
cause eye injury.
Care should be taken when drilling rivets. Damage to surrounding components is possible.
NOTE
This task is for reference only. It will never be necessary to remove all data plates at one time.
(1)
Using drill bit size comparable to rivet (1)
size, drill out rivets (1) from front of data
plate (2). Discard rivets.
(2)
Remove data plate (2) from component.
b.
Installation. Position data plate (2) on
component and install with rivets (1).
END OF TASK
4-450
