TM 5-3895-369-14
Table 2-1. Controls and Indicators - CONT.
Key
24
25
26
27
28
29
Control/Indicator
Rotor Boom Control
Lever
Function
Controls raising and lowering of rotor assembly. Push lever forward
(RAISE ROTOR) to raise rotor assembly. Pull lever backward
(LOWER ROTOR) to lower rotor assembly.
Tailboard Control
Lever
Controls raising and lowering of tailboard. Push lever forward
(RAISE TAILBOARD) to raise tailboard. Pull lever backward
(LOWER TAILBOARD) to lower tailboard.
Spray Bar Control
Lever
Controls operation of additive system pump and spray bar. Push lever forward
(PUMP ON/SPRAY ON) to operate pump, open spray bar, and apply additive
solution. Pull lever backward (PUMP OFF/SPRAY OFF) to turn pump off,
close spray bar, and stop application of additive solution.
Voltmeter Gauge
Measures charge on electrical system during operation. Charge should not fall
below 24 volts.
Water Temperature
Gauge
Oil Pressure Gauge
Measures engine coolant temperature in degrees Fahrenheit and Celsius.
Coolant temperature should not exceed 180°F (82°C).
Measures engine oil pressure in pounds per square inch (psi) and kilopascals
(kPa). Normal operating range should be 35 to 60 psi (241- 414 kPa).
