TM 5-3895-369-14
Table 2-1. Controls and Indicators - CONT.
Key
Control/Indicator
Function
17
Pump Speed
Controls pumping rate of additive system pump. As pump speed control knob is
Control
adjusted, changes in pumping rate can be observed on PUMP OUTPUT meter.
Turning control knob to the right increases pumping rate and to the left
decreases rate.
18
Pump Speed Control
Illuminates to indicate pump speed control switch is in SPRAY ON position.
Switch Indicator Light
19
20
21
Pump Speed Control
Applies power to pump speed control and additive system pump meters.
Switch
Up position (SPRAY ON) applies power; down position (SPRAY OFF)
activates pump speed control and meters.
THROTTLE Control
Controls engine speed. Push lever fully forward (FULL) for increase engine
Lever
power. Pull lever fully backward (IDLE) to decrease engine power.
TRANSMISSION
Controls forward and reverse movement of vehicle. Control lever
Control Lever
has three positions: full forward (FWD) places vehicle in forward gear, center
position places vehicle in neutral, and full backward (REV) position places
vehicle in reverse.
22
HORN Switch
Press to sound horn.
23
Steering Wheel
Controls left and right movement of vehicle during operation.
2-4
