TM 5-3895-369-14
4-31. VALVE COVER REPLACEMENT.
This task covers:
a. Removal
INITIAL SETUP
b. Installation
Tools
Tool kit, general mechanic’s: automotive
Wrench, torque
MaterialslParts
Packings, preformed (6)
Gaskets, valve cover (6)
Equipment Condition
TM or Para
Condition Description
Para 4-125
Hood removed.
Para 4-45
Air inlet pipe removed.
Para 4-43
Turbocharger air inlet
hose removed.
General Safety Instructions
If engine has recently been in operation, allow
time to cool before performing procedure.
a.
Removal.
(1)
Remove filler cap (1) and six screws (2).
(2)
Remove six preformed packings (3) from
screws (2). Discard packings.
Make sure no contaminants fall into valves
when removing covers or damage to
equipment may result.
(3)
Remove six valve covers (4) and valve cover
gaskets (5). Discard gaskets.
b. Installation.
(1)
Install six valve cover gaskets (5) and valve
covers (4).
(2)
Install six preformed packings (3) on
screws (2).
(3)
Install six valve covers (4) with screws (2). Tighten screws 216 lb-in (24 N •m).
(4)
Install filler cap (1).
4-173
