TM 5-3895-369-l4
(5)
Remove six screws (14) and lockwashers (15)
from pinion bearing cage (16). Using
locknut (11), install rotor drive pinion puller
to bearing cage (16). Discard lockwashers.
(6)
Remove bearing cage (16) and shims (17)
from gear housing (6). Measure and record
number and size of each shim.
(7)
Remove six screws (18), lockwashers (19),
bearing retainer (20), and gasket (21) from
left side of gear housing (6). Discard
lockwashers and gasket.
5-528
