TM 5-3895-369-14
5-89. PUMP FRAME REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Tool kit, general mechanic’s: equipment
maintenance and repair
MaterialslParts
Lockwasher (6)
Personnel Required
MOS62B, Construction equipment repairer (2)
Equipment Condition
TM or Para
Condition Description
Para 4-151
Additive pump assembly
removed.
Para 5-80
Additive system motor
removed.
a.
Removal.
(1)
Remove four nuts (1) lockwashers (2),
screws (3) and pump frame (4) from vehicle
frame (5). Discard lo&washers.
(2)
Remove two nuts (6), lockwashers (7),
screws (8), and mounting block (9) from
pump frame (4). Discard lo&washers.
b. Installation.
(1)
Install mounting block (9) on pump
frame (4) with two screws (8)
lo&washers (7), and nuts (6).
(2)
Install pump frame (4) on vehicle frame (5)
with four screws (3). lockwashers (2), and
nuts (1).
NOTE
Follow-on maintenance:
Install additive system motor
(para 5-80).
Install additive pump assembly
(para 4-151).
END OF TASK
5-525
