TM 5-3895-369-14
5-86. BOOM HOIST CYLINDER REPAIR (CONT).
(4)
Install crown seal (11) and wear ring (10) on
piston (8).
(5)
Install preformed packing (9) on piston
rod (1).
(6)
Install piston (8) and locknut (7) on piston
rod (1). Tighten locknut 450 to 500 lb-ft
(610 - 678 N•m).
(7)
Lubricate piston rod (1), assembled parts,
and inside of cylinder body (2) with
hydraulic fluid.
(8)
Install piston rod (1) and assembled parts in
cylinder body (2) with retaining ring (6).
(9)
Install retaining plate (5) with four
screws (4). Tighten screws 216 to 240 lb-ft
(293 - 325 N •m).
5-510
