TM 5-3895-369-14
5-80. ADDITIVE SYSTEM MOTOR REPLACEMENT/REPAIR (CONT).
d. Assembly.
(1)
If removed, install roller bearing (34) in
housing (9).
(2)
Install seal (33) and retaining ring (32).
(3)
(4)
(5)
(6)
Position thrust washer (31) in housing (9).
Install cylinder (24) on shaft (2) with key (26) and retaining ring (23).
Position nine pistons (25) in cylinder (24).
Position thrust bearing (30). piston race (29), sleeve spacer (28) and spacer (27), on shaft (2) and install
shaft in housing (9) as an assembly.
6-472
