TM 5-3895-369-14
(3) Remove sealing ring (6), six springs (7),
and preformed packings (8 and 9) from
aluminum housing (10). Discard
preformed packings.
(4) If damaged, remove pin (11).
(5) Remove six screws (12) and lockwashers (13)
from manifold (14). Discard lockwashers.
(6) Remove manifold (14) from motor end
cap (15).
(7) Remove and discard two back-up rings (16)
and three preformed packings (17) from
manifold (14).
5-346