TM 5-3895-369-14
(11)
Install input shaft (22) in bearing (17) from
beneath cover (18).
(12)
Install snap ring (23) on input shaft (22).
(13)
Install bearing cup (24) and shift fork shaft
seal (25) in cover (18).
Adhesive sealant can damage your eyes.
Wear safety goggles/glasses when using;
avoid contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
(14) Apply a bead of sealing compound around
flanged edge of case (2).
(15)
Install cover (18) on case (2) with 12
washers (26) and screws (27). Tighten
screws 20 to 25 lb-ft (27 - 34 N ).
m
5-311