TM5-3895-369-14
5-49. STARTER ASSEMBLY REPAIR (CONT).
Install two brushes (42) with
(6)
lo&washer (41) and two screws (40).
Install two brush holders (36), brush ground
(7)
holders (37), and springs (38) in
brackets (39) with two pins (35).
Install grommet (34) and field
(8)
connector (33) in housing (11) with
screw (32).
(9)
If removed, install bushing (31) and oil
seal (30) in center bearing plate (29).
(10)
Install center bearing plate (29), gasket (28),
washer (27), bendix (26), collar (25),
retaining ring (24), and collar (23) on
armature (IS).
5-302