TM 5-3895-369-14
Disassembly.
a.
(1) Remove flange nut (1) and mark upper
control lever (2) and control shaft (3) to
align in assembly.
(2) Remove upper spring (4), upper control
lever (2), and intermediate disc (5).
(3) Mark lower control lever assembly (6) to
match scribe mark on control shaft (3) to
align in assembly.
(4) Remove lower control lever assembly (6),
top spring seat (7) lower spring (8) and
bottom spring seat (9).
NOTE
Do not disassemble lower control lever
assembly unless replacing a part.
(5) Remove screw (10), lockwasher (11), washer
(12), and middle control lever (13) from
bottom control lever (14).
Discard lockwasher.
5-242
