TM 5-3895-369-14
5-36. OUTPUT FLANGE ASSEMBLY REPLACEMENT.
This task covers:
b. Installation
a. Removal
INITIAL SETUP
Equipment Condition
Tools
Condition Description
TM or
Shop equipment, automotive maintenance and
Forward floor plate
repair: organizational maintenance common
removed.
no. 1, less power
Clutch drive shaft
removed.
Wrench, torque
Parking brake cable
removed.
Materials/Parts
Adhesive sealant, silicone (item 1, appendix E)
a . Removal.
(1) Remove four nuts (1) and two brackets (2) from output flange assembly (3).
(2) Remove flange (3) from clutch face (4).
b. Installation.
Adhesive sealant can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes.
If sealant contacts eyes, flush eyes with water and get immediate medical attention.
(1) Apply sealant to face of clutch (4) and install output flange assembly (3) and two brackets (2) with four
nuts (1). Tighten nuts 250 to 270 lb-ft (339 - 366 Nm).
5-210