TM 5-3895-369-14
c.
Installation.
(1) Position support plates (12) on rear floor
panel (17).
(2) Install four screws (15), washers (16),
lockwashers (14), and nuts (13).
(3) Install base (9) between support plates (12).
(4) Install two screws (11) and nuts (10) on
support plates (12).
(5) Install elevation bar support (6) by pulling
control handle (8) and tightening seat
adjustment knob (7). Re-insert control
handle (8), lining up holes in base (9) and
elevation bar support (6).
(6) Install seat assembly (5) to elevation bar
support (6) with four washers (3),
lo&washers (2), and nuts (1) on seat
studs (4).
NOTE
Follow-on Maintenance: Lower aft floor
panel (para 4-133).
END OF TASK
4-449