TM 5-3895-369-14
4-131. REAR FENDER REPLACEMENT.
This task covers:
b. Installation
a. Removal
INITINAL SETUP
Tools
Equipment Condition
TM or Para
Condition Description
Tool kit, general mechanic's: automotive
Fuel can assembly,
Materials/Parts
ratchet, and holder
Lockwashers (8)
removed.
Rear floodlights removed
Personnel Required
MOS62B, Construction equipment repairer (2)
a.
Removal.
NOTE
Both rear fenders are removed the same
way. Left side shown.
(1) Remove two nuts (1) lockwashers (2) four
washers (3) and two screws (4) from front
fender bracket (5). Discard lockwashers.
(2) Remove two nuts (6), lockwashers (7), four
washers (8) and screws (9). Discard
lockwashers.
(3) Remove fender (11) from brackets (5
and 10).
(4) Repeat steps (1) through (3) for other
fender.
b . Installation.
(1) Position fender (11) on front and rear
brackets (5 and 10).
(2) Install four screws (4 and 9), eight washers (3 and 8), four lockwashers (2 and 7) and nuts (1 and 6).
(3) Repeat steps (1) and (2) for other fender.
NOTE
Follow-on Maintenance:
Install floodlights (para 4-81).
Install fuel can assembly, ratchet, and holder (para 4-50).
END OF TASK
4-443
