TM 5-3895-369-14
d. Installation.
NOTE
Ensure that starter gear engages flywheel.
(1) Position starter (11) and solenoid (5) on flywheel housing (12).
(2) Install two wires (10), negative battery cable (9), and three screws (8). Tighten screws 32 lb-ft (43 N.m).
(3) Install wire (7) and nut (6).
(4) Install five wires (3 and 4), positive battery cable (2) and nut (1).
NOTE
Follow-on Maintenance: Install engine battery (para 4-87).
END OF TASK
4-275