TM 5-3895-369-14
d. Assembly.
(1) Install sediment filter (5) and preformed
packing (4) in sediment head (6).
(2) Position wire holder (2) and install bowl (3)
(filled with new fuel to aid fuel system
bleeding) on sediment head (6) and tighten
thumb wheel (1) securely.
e.
Installation.
(1) Install sediment bowl assembly (6) on rear
lifting bracket (7) with two screws (5),
lockwashers (4), and nuts (3). Tighten nuts
216 lb-in (24 Nm).
(2) Install two preformed packings (2) and
reducers (1).
NOTE
Follow-on maintenance:
Install fuel lines and fittings
Bleed fuel system (para 4-54).
Close left engine door (para 2-14).
END OF TASK
4-236