TM 5-3895-369-14
Table 2-1. Controls and Indicators - CONT.
Function
Control/Indicator
Key
Controls pumping rate of additive system pump. As pump speed control knob is
17
Pump Speed
adjusted, changes in pumping rate can be observed on PUMP OUTPUT meter.
Control
Turning control knob to the right increases pumping rate and to the left
decreases rate.
Illuminates to indicate pump speed control switch is in SPRAY ON position.
Pump Speed Control
18
Switch Indicator Light
Applies power to pump speed control and additive system pump meters.
Pump Speed Control
19
Up position (SPRAY ON) applies power; down position (SPRAY OFF)
Switch
activates pump speed control and meters.
Controls engine speed. Push lever fully forward (FULL) for increase engine
THROTTLE Control
20
power. Pull lever fully backward (IDLE) to decrease engine power.
Lever
Controls forward and reverse movement of vehicle. Control lever
TRANSMISSION
21
has three positions: full forward (FWD) places vehicle in forward gear, center
Control Lever
position places vehicle in neutral, and full backward (REV) position places
vehicle in reverse.
Press to sound horn.
HORN Switch
22
Controls left and right movement of vehicle during operation.
Steering Wheel
23
2-4
