LO 5-3895-219-12
NOTES - CONTINUED:
check for leaks and bring oil level to level plug opening.
10. WHEEL BEARINGS. Each 1000 hours, remove
wheels, inspect all parts, replace damaged or worn
parts, repack bearings, and assemble.
11. GREASE .CAP. To fill cap turn wingnut clockwise
to cap, fill cup, replace cap and turn wing nut
counterclockwise to top of shaft.
12. LUBRICANTS. The following is a list of lubricants
with military symbols and applicable specification
numbers.
OE/HDO
MIL-L-2104
GO
MIL-L-2105
GAA
MIL-L-46167
OEA
MIL-G-10924,
CW
VV-L-751
(SD), Type II
P-D-680
Copy of this Lubrication Order will remain with the
equipment at all times, instructions contained herein are
mandatory.
By order of the Secretary of the Army:
JOHN A. WICKHAM, JR.
General, United States Army
Chief of Staff
OFFICIAL:
ROBERT M. JOYCE
Major General, United States Army
The Adjutant General
DISTRIBUTION:
To be distributed in accordance with DA Form 12-25B,
Operator and Organizational maintenance requirements
for Trailer Mounted Concrete Mixers.
TA 220612
U.S. GOVERNMENT PRINTING OFFICE: 1984-420-903/254
CARD 8 OF 8
