TM 5-3895-372-24P
F-
Direct support or aviation intermediate is the
d. PART NUMBER (Column (4)). Indicates the
lowest level than can do complete repair of the
primary number used by the manufacturer (individual,
item.
company, firm, corporation, or Government activity),
H-
General support is the lowest level that can do
which controls the design and characteristics of the item
complete repair of the item.
by means of its engineering drawings, specifications
L-
Specialized repair activity is the lowest level that
standards, and inspection requirements to identify an
can do complete repair of the item.
item or range of items.
D-
Depot Is the lowest level that can do complete
repair of the item.
NOTE:
Z-
Nonreparable. No repair is authorized.
When you use an NSN to requisition
B-
No repair is authorized. (No parts or special
an item, the item you receive may
tools are authorized for the maintenance of a
have a different part number from the
"B"-coded item.) However, the item may be
part ordered.
reconditioned by adjusting, lubricating, etc., at
e. DESCRIPTION AND USABLE ON CODE (UOC)
the user level.
(Column (5)).
This column Includes the following
(3) Recoverability Code.
Recoverability
Information:
codes are assigned to items to indicate the disposition
action on unserviceable Items. The recoverability code
(1) The Federal item name and, when
Is entered in the fifth position of the SMR code as
required, a minimum description to identify the item.
follows:
(2) Physical security classification.
Code
Application/Explanation
(3) Items that are included in kits and sets are
Z-
Nonreparable item.
When unserviceable,
listed below the name of the kit or set on Figure KIT.
condemn and dispose of the item at the level
of maintenance shown in the 3d position of the
(4) Spare/repair parts that make up an
SMR code.
assembled item are listed immediately following the
O-
Reparable item.
When uneconomically
assembled item line entry.
reparable, condemn and dispose of the item at
(5) Part numbers for bulk materials are
unit maintenance or aviation unit level.
referenced in this column in the line item entry for the
F-
Reparable item.
When uneconomically
item to be manufactured/fabricated.
reparable, condemn and dispose of the item at
the direct support or aviation Intermediate
(6) When the item Is not used with all serial
level.
numbers of the same model, the effective serial numbers
H-
Reparable
Item.
When uneconomically
are shown on the last line(s) of the description (before
reparable, condemn and dispose of the Item at
UOC).
the general support level.
(7) The usable on code, when applicable (see
D-
Reparable item. When beyond lower level
paragraph 5, Special Information).
repair
capability,
return
to
depot.
Condemnation and disposal of item not
(8) In the Special Tools List section, the basis
authorized below depot level.
of Issue (BOI) appears as the last line(s) In the entry for
L-
Reparable item. Condemnation and disposal
each special tool, special TMDE, and other special
of item not authorized below specialized repair
support equipment.
When density of equipments
activity (SRA).
supported exceeds density spread Indicated in the basis
A-
Item
requires
special
handling
or
of issue, the total authorization Is Increased
condemnation procedures because of specific
proportionately.
reasons e.g., precious metal content, high
dollar value, critical material, or hazardous
(9) The statement "END OF FIGURE"
appears just below the last item description in Column 5
material).
Refer
to
appropriate
for a given figure in both Section II and Section III.
manuals/directives for specific instructions.
c. FSCM or CAGEC (Column (3)). The Federal
f. QTY (Column (6)). The QTY (quantity per figure
Supply Code for Manufacturer (FSCM) or the
column) indicates the quantity of the item used in the
Commercial and Government Entity (CAGE) Code (C) is
breakout shown on the illustration/figure, which is
a 5-digit alphanumeric code which is used to identify the
prepared for a functional group, subfunctional group, or
manufacturer, distributor, or Government agency, etc.,
an assembly. A "V" appearing in this column in lieu of a
that supplies the item.
quantity indicates that the quantity is variable and the
quantity may vary from application to application.
3 Change 1
