TM5-3895-369-14
5-50. TWO-SPEED RANGE BOX REPLACEMENT/REPAIR (CONT).
(16)
Install bearing retaining cap (28), four
washers (29), and screws (30) on cover (18)
without shims. Tighten screws evenly.
(17)
Measure gap between cover (18) and
cap (28) on three sides. Record the
measurement.
NOTE
Adding 0.005 to 0.010 in. (0.127 -
0.254 mm) to measurement recorded
above allows for 0.007 to 0.012 in. (0.178 -
0.305 mm) end play for helical gear shaft.
(18)
Remove four washers (29), screws (30), and
bearing cap (28). Install shims (31) with the
combined thickness of measurement plus
0.005 to 0.010 in. (0.127 - 0.254 mm).
(19) Install bearing cap (28), four
washers (29), and screws (30). Tighten
screws 25 to 30 lb-ft (34 - 41 N•m).
5-312
