TM 5-3895-369-14
5-20. FLYWHEEL HOUSING REPLACEMENT (CONT).
(4)
Remove rear cover gasket (4), seal (5), rear cover (6), and gasket (7). Discard gaskets and seal.
b. Installation.
(1)
Install gasket (7), rear cover (6), seal (5), and rear cover gasket (4) on housing (2).
(2)
Install flywheel housing (2) on engine (3) with eight screws (1). Tighten screws 57 lb-ft (77 N•m) according
to pattern shown.
NOTE
Follow-on Maintenance: Install flywheel (para 5-18).
END OF TASK
5-158
